VELCRO® Sticky Back Coins
- Overview
- Technical Specifications
- Similar Products
Main Features
Tape Width: | 0.62" (15.7 mm) |
Tape Length: | 0.62" (15.7 mm) |
Application/Usage: | |
Features: | Self-adhesive |
Product Color: | White |
Additional Information: | Shape: Circles Care and Application:
Instructions: - Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener. Removal Instructions - Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs Functional Temperature Range: 0-100° F (-18-38° C) |
Recycled: | No |
Assembly Required: | No |
Country of Origin: | Mexico |
Marketing information
Adhesive-backed round coins adhere to almost any smooth surface including walls, glass, tile and plastic. Use on walls, glass, tile, plastic or metal. Sticky Back Coins work with other fasteners or adheres to themselves. Simply peel and stick.
More from the Manufacturer
General Information
Manufacturer: | Velcro Companies |
Manufacturer Part Number: | 90070 |
Manufacturer Website Address: | http://www.velcro.com |
Brand Name: | VELCRO® |
Product Line: | Sticky Back |
Product Name: | 90070 General Purpose Sticky Back |
Marketing Information: | Adhesive-backed round coins adhere to almost any smooth surface including walls, glass, tile and plastic. Use on walls, glass, tile, plastic or metal. Sticky Back Coins work with other fasteners or adheres to themselves. Simply peel and stick. More from the Manufacturer |
Packaged Quantity: | 15 / Carton |
Product Type: | Hook & Loop Fastener |
Product Information
Tape Width: | 0.62" (15.7 mm) |
Tape Length: | 0.62" (15.7 mm) |
Application/Usage: | |
Features: | Self-adhesive |
Physical Characteristics
Miscellaneous
Additional Information: | Shape: Circles Care and Application:
Instructions: - Clean and dry surface before application.
- Peel tape from fastener and press firmly into place.
- Adhesive reaches maximum strength after 24 hours.
Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener. Removal Instructions - Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
- Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
- Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
- Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
- Stick the ball on the adhesive which is on your substrate and pull it off
- Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
- If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners
Weight Rating:
1 lbs per square inch up to 5 lbs Functional Temperature Range: 0-100° F (-18-38° C) |
Recycled: | No |
Assembly Required: | No |
Country of Origin: | Mexico |